90mm Celotex
90mm Celotex CW4000 Partial Fill Cavity Wall (5/pack)
A insulation with partial fill option for wall cavities made of masonry in the 90mm Celotex CCW4000 Partial Cavity Wall (5/pack). Cavity Wall (5/pack) comes with a tough plastic isocyanurate (PIR) insulation board that is extremely thermal properties and can be used for use in the construction of new structures as well extensions.
The size is designed to be able to fit between the gaps of a cavity wall. it is extremely light and durable and is easy to move and carry in addition to putting it up at site.CE-marked 90mm Celotex CW4000 Partial Fill Cavity Wall (5/pack) is approved from the British Board of Agreement for the construction of cavity walls. It is manufactured at our original location located in Hadleigh or at our more modern facility located within Eggborough (opened in 2018.) It is sure that it will provide durable lasting energy savings that will assist in the process of future-proofing your home.
Thickness: 90mm (5/pack)
All Thickness: 25,40,50,55,60,70,75,85,90,100mm
Board size: 1200 x 450mm - 2.70 m2
Maximum board weight (kg/m2): 0.80
Tensile strength of compression: CS(10\Y)120
Stability in dimension: DS (70, 90)3 - DS (-20,-)1
The thermal conductivity is 0.022 W/mK
A flame is spreads on the ground Class 1
Reaction to flame Reaction to the
Thermal Resistance: 1.10 (m2K/W)
Facer: Aluminum foil with low-emissivity composed from composite
Can the 90mm Celotex CW4000 Partial Fill Cavity Wall (5/pack) perform?
The entire thickness range provides most efficient temperature conductivity (lambda measurement) at 0.022 W/mK. This puts it in the top insulation materials in the market.
Use our mobile and online U-value calculators to determine the best method for designing the ceiling cavity.
Product benefits
Aluminium foil that has low emissivity facing the Celotex CCW4000 can help to lower U-values by increasing the resistance to heat of the cavity that it is in. Browse our frequently asked queries to address the most frequently asked questions about how to install and position products properly . Or, contact Our technical help team.
Much like the rest of Celotex products, 90mm Celotex Partially Fill Cavity Wall (5/pack) comes with five packs of a thermal insulation product that helps meet the environmental and CO2 use emissions goals set by the federal building regulations.
The size of the board is 1200x350mm.
-Thickness : 40-100mm
-Lambda: 0.022 W/mK
Facer Aluminum with low emissivity foil
Comes in handy-sized boards that can be inserted between cavity walls tie-ups
- Is certified under BBA certificate number 16/5343
The foils are low-emissivity, that provide better thermal insulation in the air cavity
It can be used to improve the energy efficiency of both new or existing structures
Produced by blowing agents that has zero ozone depletion (ODP) with low global warming potential (GWP).
Comments
Post a Comment